Language
搜索
确认
取消
News
/
/
/
【Industry News】What are the characteristics of the medium frequency induction heating pipe bending machine?

【Industry News】What are the characteristics of the medium frequency induction heating pipe bending machine?

  • Categories:Industry trends
  • Author:
  • Origin:
  • Time of issue:2021-03-17
  • Views:0

(Summary description)When the small bending mandrel is far from the tangent point and is in the back position, it will not be able to fully stretch the material on the outside of the bend, so the position of the mandrel will cause a great rebound, which may make the full angle smaller or possible. Increase the radius, if the radius becomes larger, you can advance to the tangent point.

【Industry News】What are the characteristics of the medium frequency induction heating pipe bending machine?

(Summary description)When the small bending mandrel is far from the tangent point and is in the back position, it will not be able to fully stretch the material on the outside of the bend, so the position of the mandrel will cause a great rebound, which may make the full angle smaller or possible. Increase the radius, if the radius becomes larger, you can advance to the tangent point.

  • Categories:Industry trends
  • Author:
  • Origin:
  • Time of issue:2021-03-17
  • Views:0
Information

When the small bending mandrel is far from the tangent point and is in the back position, it will not be able to fully stretch the material on the outside of the bend, so the position of the mandrel will cause a great rebound, which may make the full angle smaller or possible. Increase the radius, if the radius becomes larger, you can advance to the tangent point. Adjust the settings of the mandrel. If the pipe keeps breaking, it means that the material is really too hard, and the material that is too hard cannot be fully stretched, and the completely annealed pipe can be used to solve the problem.

The so-called springback control refers to the possibility of the bend back to its original shape after being processed and formed. The rebound will decrease or increase the bending degree according to the bending radius of the bend. Generally, the smaller the bending degree, the smaller the rebound. The springback is affected by the position of the die and the pressure to have a different radius.

The pipe of the small pipe bender will be twisted or wrinkled. The reason for this may be that the material is too hard, so the inner diameter cannot be shrunk during bending. This phenomenon can be handled by inserting a mandrel.

Keyword:

Scan the QR code to read on your phone

Related news

 

Online Message

Username used for comment:
客户留言
Description:
验证码

Zhejiang Heliang Intelligent Equipment Co., Ltd

Contact us

Zhejiang Heliang Intelligent Equipment Co., Ltd

 

Address: Room 5-501, Building 4, No. 16, Kangzhong Road, Gongshu District, Hangzhou

 

Zhejiang Changxing Heliang Intelligent Equipment Co., Ltd

 

Address: No. 99, Chuangzhi Road, Lijia Lane, Changxing County, Huzhou, Zhejiang

 

If you have any needs or suggestions, you can click the button below to leave a message

Copyright by Zhejiang Heliang Intelligent Equipment Co., Ltd  浙ICP备2022006579号