Language

Chinese

English



搜索

确认

取消

Products and solutions

Homepage

Tube end forming machine

Introduction

1. By product category:

Conventional expanding tube end forming machine, upsetting and spinning combined tube end forming machine;

2. By processing station:

Single station, double station, three station, multi station, integrated machine;

3. According to the processing method:

Direct punching, rotary punching, cutting, rotary hammer, rotary groove and crimping;

4. According to the forming method:

Necking, flaring, extruding, heading, spiral groove, flat head chamfering and fastening;

5. By processing capacity:

Type 16, 25, 30, 40, 60;

6. According to main power:

Pneumatic, pneumatic, hydraulic, all electric, servo pump, asynchronous motor pump;

7. According to transposition:

Servo mold change, rotary chuck type, hydraulic mold change, pneumatic mold change;

8. According to die layout:

Vertical, horizontal and composite;

9. According to the clamping direction:

Vertical clamping mold, horizontal clamping mold;

10. According to the number of clamping dies:

Single clamp die, double clamp die, multi clamp die;

11. Divided by punch feed:

Single action and integral feed of punch;

12. According to the feeding method:

Manual, vibrating disc and hopper.

Features

Operation

Simple operation, man-machine touch interface, pedal or button can be added as required.

Customized

The safety protection level can be customized.

Configure

Wide range of applications, can process various pipe end shapes; It is complete in variety and can be configured according to customer needs.

Collocation

Various automatic nesting mechanisms can be collocated at will, and interfaces for later automatic transformation can be reserved.

Parameters

Machine	Type	Features
Tube end forming machine with expansion and reduction	Fully automatic pneumatic (type 12/ 16)	direct punching or rotary punching; Single station or multi-station; Vertical or horizontal.
Tube end forming machine with expansion and reduction	Fully automatic hydraulic (type 20/ 30)
Tube end forming machine with direct punching	Servo multi-station(type 25/ 30/ 40/ 60)	servo pump or normal pump; movement for each tooling or for whole tooling Vertical or horizontal; Single clamp or double clamps; chamfer or rotary punching 9+1 working stations maximum.
Tube end forming machine with vibrator bowl	Single station	Each One tube
Tube end forming machine with vibrator bowl	Double material single head	Each Two tubes

Definition

HLEF

Tube end forming machine

025

Capacity (tube diameter) : 016/020/025/030/040/060

01

Forming method: 0-direct punching, 1-rotary
punching or chamfering;
Num of workstations: 1-single, 2-double,max=9.

01

Stamping die layout: 1- horizontal, 2- vertical,
3- circumference;Clamping layout: 1-horizontal, 2-vertical,
3-horizontal double clamping, 4-vertical doubleclamping.