Language

English



搜索

确认

取消

Products and solutions

Homepage

Patent display

A production line for manufacturing four-way reversing valve D connection

Introduction

1. Spinning is an advanced plastic processing method

It combines the advantages of less chip and no cutting in forging, extrusion, stretching, bending, ring rolling, cross rolling and rolling, and is widely used in the processing and forming of rotary parts.

2. By processing capacity:

25, 30, 40, 50, 80, 120;

3. According to the processing method:

Single wheel rolling type, double wheel rolling type, three claw ball type, double station rolling type, special cutter type;

4. According to the loading and unloading methods:

Pneumatic loading and unloading, servo loading and unloading, tail loading;

5. By product process:

Interior hole process, mandrel process, high-frequency heating process;

Features

Function

The range of products is very wide. Such as liquid reservoir, muffler and filter for air conditioner; Nose cones and shells of rockets, missiles and satellites; Submarine penetration seal ring and torpedo shell; Radar reflector and searchlight housing; Jet engine fairing and prime mover parts; Hydraulic cylinder, compressor casing and cylinder; Turbine shaft, nozzle, TV cone, combustion chamber cone and bellows.

Configure

The spinning machine operating system is easy to operate, suitable for G code, fast in scanning operation and high in execution efficiency.

Interface

MES and cloud platform interfaces are reserved.

Parameters

Parameters/Type	CNC 25	CNC 30	CNC 40	CNC 50	CNC 80	CNC 120
Diameter	Φ9.52 ～Φ25.4 mm	Φ16 ～Φ32 mm	Φ16 ～Φ40 mm	Φ20 ～Φ50.8 mm	Φ32 ～Φ90 mm	Φ80 ～Φ120 mm
Automatic feeding length	60 ～ 200 mm		60 ～ 240 mm	80 ～ 250 mm	80 ～ 300 mm
Thickness	0.7 ～ 1.2mm	Single wheel：0.8 ～ 1.5mm three-jaw：0.8 ～ 1.2mm			1.2 ～ 2.0mm	1.5 ～ 2.5mm
Materials	Carbon steel, copper tube (semi-hard), aluminum tube			Carbon steel, stainless steel, copper tube (semi-hard)
The energy consumption	6 ～ 11KW	7 ～ 11KW	7 ～ 11KW	7 ～ 11KW	8 ～ 13KW	8 ～ 17KW
Air pressure	0.5 ～ 0.8Mpa
Hydraulic pressure	Less than 5.0 Mpa