Language
搜索
确认
取消
Products and solutions
/
/
A five-axis pipe bending machine
这是描述信息

Introduction

1. Spinning is an advanced plastic processing method

 

It combines the advantages of less chip and no cutting in forging, extrusion, stretching, bending, ring rolling, cross rolling and rolling, and is widely used in the processing and forming of rotary parts.

 

2. By processing capacity:

 

25, 30, 40, 50, 80, 120;

 

3. According to the processing method:

 

Single wheel rolling type, double wheel rolling type, three claw ball type, double station rolling type, special cutter type;

 

4. According to the loading and unloading methods:

 

Pneumatic loading and unloading, servo loading and unloading, tail loading;

 

5. By product process:

 

Interior hole process, mandrel process, high-frequency heating process;

 

Features

Function

The range of products is very wide. Such as liquid reservoir, muffler and filter for air conditioner; Nose cones and shells of rockets, missiles and satellites; Submarine penetration seal ring and torpedo shell; Radar reflector and searchlight housing; Jet engine fairing and prime mover parts; Hydraulic cylinder, compressor casing and cylinder; Turbine shaft, nozzle, TV cone, combustion chamber cone and bellows.

 

Configure

The spinning machine operating system is easy to operate, suitable for G code, fast in scanning operation and high in execution efficiency.

 

Interface

 

MES and cloud platform interfaces are reserved.

 

Parameters

Parameters/Type
CNC
25
CNC
30
CNC
40
CNC
50
CNC
80
CNC
120
Diameter
Φ9.52 ~Φ25.4 mm
Φ16 ~Φ32 mm
Φ16 ~Φ40 mm
Φ20 ~Φ50.8 mm
Φ32 ~Φ90 mm
Φ80 ~Φ120 mm
Automatic feeding length
60 ~ 200 mm
60 ~ 240 mm
80 ~ 250 mm
80 ~ 300 mm
Thickness
0.7 ~ 1.2mm
Single wheel:0.8 ~ 1.5mm  three-jaw:0.8 ~ 1.2mm
1.2 ~ 2.0mm
1.5 ~ 2.5mm
Materials
Carbon steel,
copper tube (semi-hard), aluminum tube
Carbon steel,
stainless steel, copper tube (semi-hard)
The energy consumption 6 ~ 11KW 7 ~ 11KW 7 ~ 11KW 7 ~ 11KW 8 ~ 13KW 8 ~ 17KW
Air pressure
0.5 ~ 0.8Mpa
Hydraulic pressure
 Less than 5.0 Mpa

Definition

HLTS

Spinning machine

030

Processing capacity: 025-120

01

Processing method: 01- single wheel, 02-double wheel, 03- three - jaw, 22- double -station.

01

Process: 01 – turning for inner hole, 02- Core Rod, 03- high frequency heating

00

Automatic loading: 01- pneumatic, 02- servo,03- tail.

Sample tube display

Previous page
1

Zhejiang Heliang Intelligent Equipment Co., Ltd

Contact us

Zhejiang Heliang Intelligent Equipment Co., Ltd

 

Address: Room 5-501, Building 4, No. 16, Kangzhong Road, Gongshu District, Hangzhou

 

Zhejiang Changxing Heliang Intelligent Equipment Co., Ltd

 

Address: No. 99, Chuangzhi Road, Lijia Lane, Changxing County, Huzhou, Zhejiang

 

If you have any needs or suggestions, you can click the button below to leave a message

Copyright by Zhejiang Heliang Intelligent Equipment Co., Ltd  浙ICP备2022006579号